Pricing includes MVPI2 Standard Interface, 20 Credits to tune 1 2008-2017 Viper, plus one Unleashed Custom tune.
Our development 2010 Viper gained 30WHP and 34WTQ, and our 2014 TA Viper picked up 42WHP & 60WTQ over the stock calibration.
Take your Viper to the next level with HP Tuners & Unleashed Custom Tuning!
The VCM Editor utility is a comprehensive VCM/PCM programmer and parameter editor.
VCM Editors Flash utility allows the user to read the VCM/PCM flash memory and save it to a binary file. The Flash utility allows a valid calibration to be written to the VCM/PCM and also incorporates an automatic VCM/PCM recovery capabilities for ultimate protection against any reflashing problems that may be encountered.
The VCM Editor also allows modification of the saved binary image. The VCM Editor allows all parameters such as Spark, Fuel, RPM Limits, FAN Temps, Transmission Shift points and pressures, Speedometer settings and many, many more. The editor provides an easy to use graphical interface and many powerful table manipulation capabilities such as copying, scaling and shifting to name a few.
So you're probably thinking, what else could there be for a professional tuner? Well, read on...
The VCM Suite has certain features that a professional tuner may find more useful. It includes some of the following extra capabilities.
VCM Editors Flash utility allows not just calibration reflashing and automated recovery, but entire VCM/PCM image reflashing. This means that you are free to make any operating system or calibration level modifications and flash those to the VCM/PCM. This has many uses for the advanced enthusiast, serious tuner or engine swap shop, allowing complete control over the VCM/PCM software environment.
The VCM Editor also allows for increased vehicle support for tuners, and also access to extra VCM/PCM operating system code modifcations. Tuners also have the option to modify VIN's, a useful feature for mail order VCM's.
Security. Protect your tunes with Tunerlock. Only you have the ability to read and write to VCM/PCM's that you have Tunerlocked. Prevent unwanted access to your hard work.
The VCM Scanner utility is a fully featured OBDII scanning and diagnostic tool.
It allows viewing, charting and logging of diagnostic data in real time via the vehicle OBDII diagnostic data port. It also allows viewing of vehicle Diagnostic Trouble Codes (DTC's) and other vehicle information. Built in VCM controls also supported. Command fans, closed loop, gear select, timing, air fuel ratio and more real time! No editor package can be considered complete without comprehensive scan tool capabilities.
VCM Suite is the complete package.
These components combine to make VCM Suite the most feature rich, powerful and comprehensive VCM/PCM reprogramming and diagnostics package available on the market today. In addition, our attractive make/model/year based licensing structure makes VCM Suite a clear leader in value for money.
VCM Suite is the ultimate tuning tool designed for your serious tuner and tuner shop.
Not legal for sale or use in California on pollution controlled motor vehicles
Our Calibrations are written to be US Federally compliant.
Custom tune files are not transferable between different vehicles. If you change vehicles new files will need to be purchased and assembled for the new vehicle.
Learn About Our Easy Returns
All Warranties on this part are the Manufacturers. The Seller Unleashed Tuning LLC hereby expressly disclaims all warranties, either express or implied, including any implied warranty on merchantability or fitness for a particular purpose, and Unleashed Tuning LLC neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of the part. This disclaimer by the seller, Unleashed Tuning LLC in no way affects the terms of the manufacturers warranties.
Parts can only be returned within 30 days of purchase and must be accompanied by the original invoice. There is a 15% restocking fee on all returned parts and canceled orders that have been processed. No refunds on parts that have been Installed/used, Special order, Electrical parts, HPTuners credits, Custom vehicle calibrations or software. Freight charges are not refundable. No refunds after 30 days. We are not responsible for damage or loss in transit.
To initiate a return, a Return Authorization Number (RA#) must be requested within 30 days of receipt of the product. When shipping the return, this RA# must be clearly labeled on the package. Items returned without an RA# are not eligible for refund or exchange.
Canadian Orders are eligible for a return or exchange subject to the above conditions. Eligible returns and exchanges will not be refunded the cost of shipping on the original order. Duties and taxes paid on the original order must be must be refunded through the Canadian Border Services Agency (CBSA). A link to the required B2G form and CBSA instructions to request a refund of duties and taxes is below.
CBSA Duties and Taxes Refund
International orders are not eligible for return or exchange, unless in the case of manufacturer defect or Unleashed Tuning error.
1. Contact an Unleashed Tuning Customer Care Specialist at email@example.com
2. Our Customer Care Specialists will provide you with an RA#, and email you detailed return instructions.
3. Clearly write and/or affix the RA# on the package and return to the address specified in the email.
4. Unless the return is due to manufacturer defect or Unleashed Tuning error, the customer is responsible for return shipping costs. For your convenience, Unleashed Tuning offers discounted return shipping labels. Should you choose this option, the cost of the label will be deducted from the refund amount.
5. The original method of payment used to place the order will be credited the purchase price, excluding return shipping costs. Unleashed Tuning will send a confirmation email once the refund has been issued. Please allow 5-7 business days for your bank to process the credit.
If you receive an item that is broken or defective, Unleashed Tuning will provide a prepaid return shipping label. To obtain the return shipping label, follow the above return procedure.
There is a 15% restocking fee on all returned parts and canceled orders that have been processed. These items qualify for a refund, less the restocking fee and any return shipping costs, when returned with all original packaging, paperwork and parts in new and unused condition.
No refunds on parts that have been installed/used, Special order, Electrical parts, HPTuners credits, Custom vehicle calibrations or software. Freight charges are not refundable. No refunds after 30 days.
"Large Print" Disclosures
Authorized items must be returned with all original packaging, paperwork and parts in new and unused condition. Items not returned in the above condition will fail inspection and a refund will not be issued.
Unleashed Tuning may issue a refund in good faith prior to receiving the returned item. We reserve the right to rescind such refunds if the item fails inspection upon arrival.
Unleashed Tuning will not compensate for damages incurred during product installation or use, nor reimburse labor charges or installation fees, under any circumstances.
Contact an Unleashed Tuning Customer Care Specialist at firstname.lastname@example.org. We will provide you with an RA#, which is required for all returns, and email you detailed return instructions.
Can I exchange an item?
Yes. Items that include all original packaging, paperwork and parts in new and unused condition may be returned for exchange. Simply follow the standard Unleashed Tuning returns procedure.
Will I have to pay a restocking fee?
There is a 15% restocking fee on all returned parts and canceled orders that have been processed. These items qualify for a refund, less the restocking fee and any return shipping costs. As with all returns, these items are subject to inspection before a credit is issued.
Who pays for return shipping costs?
If the return is due to manufacturer defect or Unleashed Tuning error, we pay for return shipping. Otherwise, the customer is responsible for the cost of returning the item. In this case, we encourage you to take advantage of our discounted return shipping labels. Ask your Customer Care Specialist for details.
What should I do if I received the wrong item?
First, verify whether the item you ordered is the item you actually received. Simply compare the part number on the shipping receipt to the part number on your email order receipt.
If the numbers do not match, we may have shipped the wrong part number. Just contact us at email@example.com. We'll process your return, exchange the item for the correct part (if available) and send you a prepaid UPS shipping label for your return item.
If the numbers do match, you may have ordered the incorrect part number. Once again, please contact us at firstname.lastname@example.org. We'll process your return and exchange the item for the correct part (if available).